| |
INSTALLATION INSTRUCTIONS
|
| 1. |
Remove the existing valve stem caps on your
tires.
|
| 2. |
Make sure the O-ring seal is inside safety
cap. Installation without the seal can lead to
tire deflation.
|
| 3. |
Install a safety caps onto each of your valve
stem by twisting in a clockwise fashion. Firmly
tighten each safety cap to create a seal with
the valve.
|
| 4. |
It is recommended that you check your installation
for leaks with soapy water to insure proper seal.
|
| 5. |
After installation allow 30 minutes for the
safety cap to display accurate pressure readings.
| ALL
GREEN - Tire is properly inflated |
| YELLOW
- Tire is approximately 5lbs. Low. |
| RED
- Tire is at least 10lbs. Low. |
|
| |
WARRANTY |
| |
Accu-Pressure warrants this product
to be free of manufacturing defects for a period
of 1 year from date of purchase. If found to be
defective, please return the product with dated
proof of purchase for immediate replacement. This
warranty is limited to the replacement of the
product only and does not extend to any incremental
cost incurred should the product fail. In no case
shall liability exceed the purchase price. This
warranty gives you specific rights, which may
vary from state to state. Accu-Pressure is designed
to warn you of tire pressure loss. It does NOT
replace normal tire maintenance and pressure monitoring
recommended by the manufacturer.
|
